BB series (rehoused pedal)
LiberaToe Pedal
BB1. Proud Addams Envelope Filter & Distortion (PB052)
Proud Addams is a dual-channel effects pedal featuring Filter and Distortion sections. The filter, Wahristotle, combines an envelope filter with semi-vocoder characteristics, allowing real-time footswitch selection between high and low frequencies. It covers a broad tonal range—from screaming to wobbling—making it suitable for both guitar and bass.
The distortion section, Thingstortion, isn’t just distortion—it seamlessly blends distortion and fuzz, offering everything from crisp drive to sticky fuzz, depending on the Distortion knob and guitar volume.
• Level – Adjusts the output volume of the distortion effect. Turn clockwise to increase the level.
• Tone – Shapes the high-frequency content of the signal. Turning clockwise boosts the highs for a brighter sound.
• Distortion – Controls the intensity and waveform of the distortion. Turning clockwise produces
a more aggressive, square-shaped distortion.
• Sensitivity – Determines how quickly the effect responds to the input signal. Higher settings
(clockwise) make it more reactive.
• Attack – Adjusts the speed at which the effect engages with peak frequencies. Turning clockwise
results in a faster attack.
• Decay – Sets the release time of the effect. Higher settings (clockwise) extend the decay,
allowing the effect to linger longer.
-
Input Power: 9V DC (center negative)
-
Current Draw: 30mA (pedal power only)
-
Impedance: Input-1MΩ(filter)/510kΩ(distortion), Output-1kΩ
-
Physical Properties: 4.72“x3.8”x2.1“/12x9.7x5.3cm, 0.82lbs/370g
BB2. BearAss Fuzz & Compressor (PB212)
BearAss Fuzz & Compressor is a dual-channel pedal that delivers fuzz and compression with exceptional flexibility. The compressor section offers two selectable modes: The fuzz section covers a wide tonal spectrum—from touch-sensitive grit to outrageous saturation, responding dynamically to your instrument’s volume knob.
Compressor and Sustain & Boost. Compressor mode pushes the attack for a tighter and chewy response while maintaining a natural compression, whereas Sustain & Boost mode preserves the natural attack, letting notes breathe while enhancing sustain and volume. The green channel controls compression, while the red channel engages sustain & boost.
It works seamlessly with both guitar and bass.
• Volume – Adjusts the output volume of the fuzz effect. Turn clockwise to increase the level.
• Tone – Shapes the high-frequency content of the signal. Turning clockwise emphasizes the highs for a brighter sound.
• Fuzz – Controls the intensity and waveform of the fuzz. Turning clockwise produces a more
aggressive, square-shaped sound.
• Boost – Adjusts the volume of the sustained signal at red LED Sust mode
• Level – Adjusts the entire volume of the compression at green LED Comp mode
• Voice – Sets the tone, Full CCW: Full-range freq., Noon: Reduced low end, Full CW: Mid-focused.
• Sustain – Controls how much to compress for sustaining at red LED Sust mode
• Comp – Adjusts the amount of the compression at green LED Comp mode
-
Input Power: 9V DC (center negative)
-
Current Draw: 60mA (pedal power only)
-
Impedance(fuzz/compression): Input-33kΩ/1MΩ, Output-1kΩ/19kΩ
-
Physical Properties: 4.72“x3.8”x2.1“/12x9.7x5.3cm, 0.86lbs/390g