top of page

FEATURES

LiberaToe Platform

LiberaToe-6 (6L)

LiberaToe-6 platform is a complete analog multi-effects modular solution for both guitar and bass.

Fully analog circuit-based modules or pedals can be plugged in freely and interchangeably in the 6 slots/loops, each supporting a dual channel.

Easy-to-use routing modes enable each module or pedal to work as a dual channel pedal individually, in various combinations or all together within a programmable unit. These two modes can be used simultaneously in the specially designed 3rd mode, Ambidextrous mode, and if you want to control each pedal and its channels independently, a preset within the LiberaToe platform system can be edited to control the slots/loops, as well as the built-in buffer, frequency enhancer, and external gears. Signal paths also can be changed dynamically by a preset, split & merged, or a sequence reversal can be accomplished on the spot.

This integrated solution replaces complex pedalboards with a complete compact system, and with these benefits & possibilities:

  • Pure analog path & circuit

  • 3 signal routing modes including patented technology

  • 6 slots/loops for pluggable modules or pedals(You can add your own pedals to this system      via our pedal connections)

  • Dual channel support per slot/loop

  • 4 x 100 + 4 programmable presets

  • Parallel and reversal path controllable by a preset

  • Preset controllable built-in frequency enhancer and input buffer

  • Two sets of external controls included in a preset

  • Scalability up to 10 slots(loop) with LiberaToe-4/4L

  • Specially designed built-in buffers at 3 locations

  • Time control for tap tempo enabled modules

  • Cabinet simulator for direct connection

  • A pair of send/return interfaces

  • Auxiliary DC outputs (9V and 18V, center-negative)

  • External switch connection support

LiberaToe-4 (4L)

LiberaToe-4 platform is a total analog multi-effects modular solution for both guitar and bass.

Fully analog circuit-based modules or pedals can be plugged in freely and interchangeably in the 4 slots/loops, each supporting a dual channel.

Easy-to-use routing modes enable each module or pedal to work as a dual channel pedal individually or to work as a sole. These two modes can be used simultaneously in the specially designed 3rd mode, Ambidextrous mode.

The signal path change between serial and split & merge also can be accomplished dynamically by a preset. This integrated solution replaces complex pedalboards with a complete compact system, and with these benefits & possibilities:

  • Pure analog path & circuit

  • 3 signal routing modes including patented technology

  • 4 slots/loops for pluggable modules or pedals (You can add your own pedals to this system          via our pedal connections)

  • Dual channel support per slot/loop

  • 4 + 4 programmable presets

  • Parallel path controllable by a preset

  • Scalability up to 10 slots(loops) with LiberaToe-6/6L (the feature to be released)

  • Specially designed built-in buffers at 2 locations

  • External switch connection support, including time control for tap tempo to enabled modules

LiberaToe-S

LiberaToe-S(shell) is a box to hold a module so that it becomes a standalone pedal not requiring a LliberaToe platform.

All our fully analog circuit based modules can be plugged in the slot
of a shell, providing you dual channel effect access that can be selected or switched via a single footswitch. 

When you set up a pedalboard with sets of LiberaToe-S and their accompanying modules, it is easy to relocate the effects in the signal chain as the modules have mobility across the shells.

And when you use them with the LiberaToe connection modules, you literally quadruple the number of single channel loops thanks to the dual channel feature. For example, LiberaToe-4 connected with 8 LiberaToe-S plugged in the 4 connection platform slots, results in 16 channels.

Foot switching modality can be set up relative to a player's preference. Stock mode enables a short push to turn on/off and a brief half-second hold to change the channel. Conversely, our pedals can be set up and used in an opposite manager, VIZ., a short push to change the channel and a brief hold to turn on/off. Here are some details about our proprietary shells:

  • Pure analog path

  • A slot/loop for pluggable module

  • Dual channel support

  • Precise custom ALUMINUM alloy enclosure

  • Dual internal power of 9V & 18V

  • Voltage boost to 18V internally capable of 500mA current

  • Changeable foot switching mode

bottom of page